Available in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.
Some important features for cinema applications:
Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
Support parallel connection of cinema surround speaker
Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
Volume control on rear panel of amplifiers
High performance, light weight
DriveCore based amplifier – weighs less than 14lbs (6 kgs)
Some important features for install applications:
Minimal front panel control; block connectors and controls on back of amplifiers
High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability
Configurable input operation for stereo and parallel and bridge modes
Configurable output operation for stereo and bridge modes
AC Line Voltage and Frequency Configurations Available - (+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz Voltage Gain - 42 Sensitivity - 1.4V (for full rated power at 4 ohms) Signal to Noise Ratio - (ref. rated power, 8 ohms, 1 kHz) > 103 dB THD - <0.5% Damping Factor - (8 ohms, 10 Hz to 400 Hz) >200 Intermodulation Distortion - (from full rated output to -30 dB) <0.3% Frequency Response (at 1W, 20 Hz - 20 kHz) - -1 dB Crosstalk - >85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz) Input Impedance (nominal) - 20 kilohms balanced, 10 kilohms unbalanced Load Impedance - 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge Dimensions - 19" x 3.5" x 10.4" (48.3cm x 8.9cm x 26.4cm) Weight - 10.4 lbs (4.72 kg) Shipping Weight - 13.2 lbs (6 kg) IEC Power Connector - 15A UPC: 871015007809 Model #: XLC2800
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.