The TTP5-A 15" 2-Way Point Source Array Speaker from RCF is a high power, bi-amped, active array speaker module engineered to deliver high fidelity output for use in indoor and outdoor medium and large spaces. The 15" neo woofer is outfitted with a 4" voice coil, as is its 2" titanium dome neo c.tweeter driver. The system is designed to create horizontal or vertical arrays with a constant curvature, for medium to small theaters, up to very large outdoor stadiums and public spaces.
The RCF newly designed 4" compression driver is designed to project a pattern control of 22.5° x 60° thanks to its waveguide horn. The high powered 15" neodymium woofer with its 4" voice coil is designed to create a very controlled and precise bass response for indoor applications such as theaters. A T-pole design generates minimized amounts of flux modulation, while a dual-forced air venting system assists in voice coil ventilation for minimum power compression and higher power handling and longer speaker life. The integration of the 1600 Watt, 2-way digital amplification and the digital processing minimizes distortion, noise and increases thermal efficiency.
The TT5-A is equipped with an input board which features XLR In/Out, Gain reduction, Time Delay, Speaker presets, an RDNet ready option, a RDNet bypass switch, 4 status LEDs, and a Powercon In/Out. The TT5-A also features 96 Khz, 32 bit DSP processing and a dedicated networking board. Using our proprietary RDNet protocol, it is possible to monitor all the system parameters, from the input to the status of each single amplifier.
Having a DSP on board of each cabinet, it is possible to address to single cabinets or groups of cabinets, specific presets or modifications of parameters, like gain, equalisation or delay. The RDNet protocol is based on RS-485 communication protocol, and is stable. It is also possible to send and receive data on a simple XLR cable.
All new TT+ Two-Way Systems feature a multifunctional rear encoder to control all the speaker functions (Gain reduction, Delay, Speaker presets), even without network connection.
The TTP5-A is a flexible modular system, and as it is modular, is more easily array-able depending on the size of the event and the required coverage. High quality mechanics with a smart locking system make the set up of the system fast and almost effortless.
Houses of worship
Large railway stations
1600 Watt bi-amplified active speaker
22.5 x 60° precision waveguide
96 Khz, 32 bit DSP processing
Foam-backed grilles hide the drivers from view for pleasing aesthetics
Tour grade cabinet and mechanics
RDNet On Board
Pole mount cap
Acoustic Specifications Frequency Response - 45 Hz to 20 kHz Maximum Sound Pressure Level (SPL) - 138 dB Horizontal Coverage Angle - 22.5° Vertical Coverage Angle - 60° Low Frequency Driver - 15.0" neo, 4.0" Voice Coil (38.1 neo, 10.2 cm VC) High Frequency Driver - 2.0" neo, 4.0" Voice Coil (5.1 neo, 10.2 cm VC)Me Input / Output Input Signal - Balanced / unbalanced Input Connections - XLR, RDNet ready Input Sensitivity (Selectable) - +4 dBu Output Connectors - XLR Processor Section Crossover Frequency - 550 Hz Protection Features - Thermal, RMS Limiter - Soft limiter, dynamic Controls - Gain reduction, RDNet local setup/bypass, Time Delay, Presets (Linear, Close, Far listening, High-pass), RDNet Ready Amplifier Specifications Active or Passive - Active Total Power - 1600 Watts High Frequency Driver - 500 Watts Low Frequency Driver - 1100 Watts Cooling - Convection Connections - Powercon in/out Cabinet Material Enclosure Material - Baltic Birch plywood Hardware - Installation/Rental fittings Handles - 2 per side Color - Black Physical Specifications Dimensions (H x W x D) - 38.81 x 18.03 x 25.43" (986 x 458 x 646 mm) Weight - 145.5 lb (66.0 kg) UPC: 722589484957 Model #: TTP5A
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.