* 2 voice coil * 800 watts peak power handling * ferrite magnetics * precision rectangular ribbon wire geometry * die cast aluminum chassis applications the p audio sn8-800ca is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The sn8-800cais an upgraded design that features many of p audio's new technologies and performance upgrades. The 8 inch (203mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The sn8-800ca has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 70hz to 5000hz. the sn8-800ca features a 2 inch (51.3mm) diameter voice coil that provides an aes rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The sn8-800ca utilizes p audios auto balanced cooling (abc) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. the voice coil design is a bobbin wound geometry with p audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. nominal diameter..203 mm/8 in power rating..200 watts (aes) nominal impedance..8 ohms sensitivity...95 db frequency range..70-5000 hz chassis type..Cast aluminum magnet type...Ferrite magnet weight..1.2 kg/41.1 oz voice coil diameter..51.3 mm/2.0 in coil material...Cca-r former material..Glass fiber cone material...Paper surround material..Rubber suspension...Single x-max..2.5 mm/0.09 in gap depth..6 mm/0.24 in voice coil winding width..11 mm/0.43 in net weight..3.0 kg/6.6 lb packing dimension wxdxh.230 x 230 x 130 mm shipping weight..3.2 kg/7.1 lb small signal parameters re...5.0q fs...89 hz mms...19.41 g/0.68 oz mmd...17.26 g/0.61 oz qms...5.35 qes...0.50 qts...0.46 vas...13.44 lt/0.47 ft? bl...10.46 tm cms...1.7e-04 m/n rms...2.03 ns/m le (at 1khz)..0.26 mh sd...241 cm2 the transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. [single]
Model #: SN8800CA
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.