* 4.5 very large format voice coil * 6800 watts peak power handling * active balanced cooling * ferrite magnetics * square wire inside/outside coil design * double spider suspension * integrated demodulation rings * die cast aluminum chassis applications the sd18-6800ca is a high output low frequency transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30hz to 200hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. the sd18-6800ca employs a very large 4.5 inch (114.4mm) diameter voice coil that provides an aes rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and that active high order high pass filtering be employed if extremely high power levels are expected at low frequencies. The sd18-6800ca utilizes p audios auto balanced cooling (abc) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. the voice coil design is an inside/outside geometry with p audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. system linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. the transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. nominal diameter.457 mm/18 in power rating.1700 \n(aes) nominal impedance.8q sensitivity..98 db frequency range.30-200 hz chassis type.Cast aluminum magnet type..Ferrite magnet weight.3.17 kg/111.8 oz voice coil diameter.114.4 mm/4.5 in coil material..Sv-sq former material.Glass fiber cone material..Paper surround material.Cloth suspension..Double x-max.4.8 mm/0.19 in gap depth.15.0 mm/0.31 in voice coil winding width.24.7 mm/0.64 in net weight.14.2 kg/31.3 lb packing dimension wxdxh.505 x 505 x 275 mm shipping weight.16.0 kg/35.3 lb small signal parameters re..5.20 fs..42 hz mms.307.7 g/10.85 oz mmd.283.0 g/9.98 oz qms..11.10 qes..0.63 qts..0.59 vas..99.72 lt/3.52 ft? bl..25.91 tm cms..4.7e-03 m/n rms..7.32 ns/m le (at 1khz).1.02 mh sd..1225 cm2 [single]
Model #: SD186800CA
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.