* 3.9 very large format voice coil * 4000 watts peak power handling * active balanced cooling * ferrite magnetics * square wire inside/outside coil design * single spider suspension * integrated demodulation rings * die cast aluminum chassis applications the sd12-4000ca is a high output wide bandwidth transducer designed for low frequency response in two way designs and for high output mid bass the 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies. This design is optimized for both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The sd12-4000ca has been optimized for use in two and three way sound reinforcement system designs and may be used in either mid bass or low frequency applications. The operating bandwidth is 60hz to 3000hz. the sd12-4000ca employs a large 3.9 inch (99.3mm) diameter voice coil that provides an aes rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The sd12-4000ca utilizes p audios auto balanced cooling (abc) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. the voice coil design is an inside/outside geometry with p audio's square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. system linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement for both low frequency and mid band response. The double spider design insures very high displacement and linear response while maintaining excellent control. the transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. nominal diameter...305 mm/12 in power rating....1000 watts(aes) nominal impedance....8 ohms sensitivity....97 db frequency range..60-3000 hz chassis type...Cast aluminum magnet type...Ferrite magnet weight...5.20 kg/183.5 oz voice coil diameter...99.3 mm/3.9 in coil material....Sv-sq former material...Glass fiber cone material...Paper surround material....Cloth suspension....Single x-max...4.65 mm/0.18 in gap depth...12.0 mm/0.47 in voice coil winding width...21.3 mm/0.84 in net weight...11.8 kg/26.0 lb packing dimension wxdxh..355 x 355 x 190 mm shipping weight..12.6 kg/27.8 lb small signal parameters re....5.0q fs.....57 hz mms....80.3 g/2.83 oz mmd....73.3 g/2.59 oz qms....8.0 qes.....0.24 qts....0.23 vas...39.05 lt/1.38 ft? bl....24.51 tm cms....9.9e-05 m/n rms...3.59 ns/m le (at 1khz)....0.69 mh sd...531 cm [single]
Model #: SD124000CA
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.