Comprised of dual 6-inch LF drivers & a 1-inch Ti/waveguide, the EVID 6.2 is perfect for applications that require exemplary audio & the capability to fill large areas with sound. Additionally, the flexible Strong-Arm-Mount™ (SAM™) system provides the versatility to accommodate any installation challenge. EV's unique 6-inch dual woofer design delivers crisp & clean program for the utmost in listening experience regardless of the location. Great for larger areas that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping malls, stadiums, airports, etc.
Line-array enhanced coverage control
Organic, unobtrusive shape
Strong-Arm-Mount™ for easy, flexible aiming
Full-bandwidth overload protection
Weather resistant - Conforms to Mil Spec 810 & IEC 529 IP 34
Dual 6-inch LF transducers for extended bass & greater power handling & output
Ti direct-radiator HF transducer, Neodymium structure
Transformer Version with taps @ the following: 70 Volt: 7.5 Watt 70 Volt/100 Volt: 15 Watt, 30 Watt, 60 Watt
The loudspeaker shall be a two-way system consisting of two 6” (152mm) low-frequency transducers, a 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, & a frequency-dividing network installed in a vented, line-array enclosure. The network shall include a passive limiter for both the low-frequency & high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 150-Watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 94 dB @ one watt, 200 Hz -10 kHz @ one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency transducer shall drive a waveguide to cover evenly 100° horizontally by 90° vertically. The enclosure shall be molded of acrylic butyl styrene. The enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75” (298mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. The loudspeaker shall be adjustable over a range of 100° horizontally & 90° vertically. The support bracket shall be low profile & integral with the enclosure. The system shall be weather resistant to MIL Spec 810 & IEC 529 IP 34 test conditions. The surface mount loudspeaker shall be the Electro-Voice® EVID model 6.2. Model #: EVID6.2T
*Warranty: Full manufacturer's warranty applies.
This item is accompanied by a manufacturer's warranty. Most items, if found to be defective, may be returned to Savinglots.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.
Most manufacturers offer at least a 1 year warranty. Please check with the specific manufacturer for their warranty periods. Please email or call us with any questions if you are unable to find specific information.
Large items such as refrigerators, freezers will be serviced under warranty by the manufacturers recommended servicer at your location.
*Videos are for reference only, please refer to our features tab for exact model info.